Location:Home > Products > PVC Synthetic Resin Tile Produ >
The PVC plastic tile, PVC plastic tile synthetic resin tile Tree ear actually is a kind of material such as fat tile tile, with different name.
How to distinguish tile, can according to the following four ways:
It a: according to proportion. Resin tile main raw material is polyvinyl chloride (PVC), the specific gravity of about 1.4.
Weighing 1 square meters large resin tile, weight present volume 1.4 proof resin tile material for PVC material, can effectively guarantee the service life of the product. Weight present volume > 1.4 proof resin tile to add a lot of heavy calcium carbonate and other filling material, it is not only there is no guarantee that the use of products
Life, brittleness and products is very big, easy to fold, only suitable for simple temporary buildings.
Second: the burn.
Light resin tile with fire, fire left, fire immediately since the interest rates. And inferior resin, flame spreading and pungent odor. Reason: to add a lot of heavy calcium carbonate and inferior in the resin in order to make the product has a certain flexibility and add the plasticizing
Combustion effects of agent, and the additives, this product is not conform to the requirements of the fire and weather resistance is poor, cracking on the sun.
Third: weigh in hand by hand, percussion.
Resin tile texture is lightsome, board with board knock depressing feeling; And inferior imitation resin tile use hand have heaviness. Board and board knock sound is ringing.
Four: look look.
Resin tile the silhouette is clear, material itself luster; Instead of false and inferior imitation resin.
Glazed tile, is to use high and new chemical technology development of new building materials, with light weight, great strength, waterproof, anti-corrosion insulation flame retardant, heat insulation, and other excellent characteristics, widely used in the development zone ping change slope, the farmer's market, shopping malls, residential area, the construction of new countryside residents high-grade villas, awning, awning, antique buildings, etc.
Scope of application: apply to concrete structure, steel structure, wood, brick hybrid structure all sorts of new slope roof structure, old buildings such as ping change slope engineering.
Features:
A, super weatherability Glazed tile surface generally adopts excellent high weatherability engineering resin, such as ASA, PMMA, etc., materials, these materials are simply make it has the unusual weather in the natural environment, it is a long term exposure to ultraviolet light, moisture, heat, cold and shock, still can maintain the stability of the color and physical properties.
Second, excellent corrosion resistance
High weatherability resin and body resin has good corrosion resistance, will not be snow and rain erosion resulting in a decline in performance, can resist acid, alkali, salt and other chemical corrosion, therefore very suitable for the coastal areas of salt fog corrosion resistance and air pollution serious areas
Three, excellent load resistance
Glazed tile has good load resistance.
Fourth, shock resistance to low temperature effect is good
Glazed tile with good impact low temperature resistance, 1 kg of chongqing steel hammer is 1.5 m high free fall does not produce crack on surface of the tile, after 10 freeze-thaw cycles, the product has no empty drum, foaming, stripping, crack phenomenon.
Fifth, since the clean
Dense glazed tile surface smooth, not easy to absorb dust, with "lotus effect". The rain washed clean as new, not refute the phenomena of fouling was the rains washed out after.
Six, installation is convenient
Generally this product has the following features:
1. The large single area, shop is of high efficiency;
2. The quality is light, easy to hang discharge;
3. The product of form a complete set is complete;
4. Tools, simple process;
Seven, green environmental protection
Glazed tile through product certification of Chinese environment mark, when the product end of life can be completely recycled.
Eight, fire prevention level B1
Conform to the requirements of the national roofing material fire prevention, flame retardant grade standard, effective slow fire spread.
NO. |
Device name |
number |
1 |
Screw feeder |
1T |
2 |
SJZ80 92/188/156 or conical twin screw extruder |
1T |
3 |
SJ50/30 single screw extruder |
1T |
4 |
Drying machine + feeding machine |
1T |
5 |
Hanger mould + distributor |
1T |
6 |
Embossing machine |
1T |
7 |
Preforming drawing roller |
1T |
8 |
Molding machine (including trimming device) |
1T |
9 |
Cutting |
1T |
10 |
Stack |
1T |
Glazed tile configuration
NO.
|
Machine |
Qty. |
note |
1 |
Screw loader |
1set |
|
2 |
SJZ 80/156 conical twin-screw extruderSJZ80/156 |
1set |
|
3 |
SJ50/30 single screw co-extruderSJ50/30 |
1set |
|
4 |
Extrusion mould and flow distributor |
1set |
|
|
Extrusion mould and flow distributo |
1set |
|
5 |
Embossing roller(option) |
1set |
|
6 |
Water temperature controller(option) |
1set |
|
7 |
Side cutter切邊裝置 |
1set |
|
8 |
Glazed-tile forming machine |
1set |
|
9 |
Cutter |
1set |
|
10 |
Stacker |
1set |
琉璃瓦配置
序號 |
Machine |
Qty. |
備注 |
1 |
Screw loader |
1set |
|
2 |
SJZ 80/156 conical twin-screw extruderSJZ80/156 |
1set |
|
3 |
SJ50/30 single screw co-extruderSJ50/30 |
1set |
|
4 |
Extrusion mould and flow distributor |
1set |
|
|
Extrusion mould and flow distributo |
1set |
|
5 |
Embossing roller(option) |
1set |
|
6 |
Water temperature controller(option)水 |
1set |
|
7 |
Side cutter |
1set |
|
8 |
Glazed-tile forming machine |
1set |
|
9 |
Cutter |
1set |
|
10 |
Stacker |
1set |
In the previous:PVC Synthetic Resin Tile Production Line
The next article:PVC Synthetic Resin Tile Production Line